https://docs.labkey.io/en/docs/faq/Recent content in FAQ on LabKey DocsHugo -- gohugo.ioenhttps://docs.labkey.io/en/docs/faq/led-status/Mon, 01 Jan 0001 00:00:00 +0000https://docs.labkey.io/en/docs/faq/led-status/The Basic, PRO (ACCESS PRO 8) and LTE control units have a startup time of about 1 minute. The Light control unit starts up in less than 1 second. Control Unit LED During startup Light Color Message On Red Powered Blinking Blue Startup in progress On Blue Startup completed Blinking Yellow Sending/receiving message Violet Violet Sending/receiving BLE (Light version) Command Device LED Duration Color Message 1 sec (default) Green Access granted, the entered code or card is authorized.https://docs.labkey.io/en/docs/faq/tecnologie/Mon, 01 Jan 0001 00:00:00 +0000https://docs.labkey.io/en/docs/faq/tecnologie/LabKey’s access control works both locally (stand-alone, without an internet connection) and in the cloud, with different connectivity options depending on the installation context. QR Code With the Virtual QR Code plugin, you can enable access via QR code scanned directly from the cloud panel, even where there’s no physical reader installed at the entry point. The user’s QR code can also be generated and exported from the user management section.